120V AC/DC Photo Smoke Alarm. 7010B » Sensor: Photoelectric » Warranty Claim. Used under license by The First Alert Trust. Brk First Alert 7010b Manual View and Download First Alert SA710B user manual online. Brk electronics plug-in carbon monoxide alarm user's manual Brk electronics. Thank you for choosing First Alert. Smart Interconnectcan be interconnected to BRK Smoke, CO, and. USER’S MANUAL AC Powered Smoke & Carbon Monoxide Alarm. Get First Alert 7010B Use and Care Manual. Get all First Alert manuals!

The BRK 7010B smoke alarm is a great choice for installation in kitchen, hotels, restaurants, and other areas where nuisance alarms can be a problem. The BRK photoelectric sensor technology detects smoldering fires that may be burning for hours prior to bursting into flames. These type of fires are usually difficult to detect and are often not visible. The BRK 7010B smoke alarm is a hardwired unit that will wire directly into you 120V line voltage (using a quick plug-in power connector for easy installation). Just in case of power failure, this unit will remain operating due to a 9V battery backup. The BRK 7010B uses OptiPath360 Technology which provides a 360 degree coverage area allowing coverage to the ceiling and walls.

In addition to housing so many important features, the BRK 7010B smoke alarm is capable of being interconnected to up to 18 devices, 12 of which can be smoke alarms.

• If This Smoke Alarm Sounds.5. • This Smoke Alarm is designed to be mounted on any standard wiring junction box up to a 4-inch size, on either the ceiling or wall (if allowed by local codes). Read “Recommended Locations For Smoke Alarms” and “Locations to Avoid For Smoke Alarms” before you begin installation. Roland Sound Canvas Software there.

Torrent Adobe Lightroom 6 Upgrade Cost. • Alarm removal is not a concern. These Smoke Alarms have two separate locking features: one to lock the battery compartment, and the other to lock the Smoke Alarm to the mounting bracket. You can choose to use either feature independently, or use them both. • Underwriters Laboratories, Inc. If you choose to use an aerosol smoke product to test the Smoke Alarm, be certain to use one that has been Listed to Underwriters Laboratories, Inc. Safety Standards, and use it only as directed.

• Alarm cover, or installation in an improper location. Clean the Smoke Alarm as described in “Regular Maintenance,” and install a fresh battery, then test the Smoke Alarm again. If it fails to test properly when you use the test button, or if the problem persists, replace the Smoke Alarm immediately. • On ceilings, install Smoke Alarms as close to the center of the ceiling as pos- sible. If this is not possible, install the Smoke Alarm at least 4 inches (102 mm) from the wall or corner. • If children or others do not readily waken to the sound of the smoke alarm, or if there are infants or family members with mobility limitations, make sure that someone is assigned to assist them in fire drill and in the event of an emergency.