The new PLASMA PROF 163 ACC three-phase 'chopper' power source, with a power of 160A at 40%, represents the top model in the Cebora metal plasma. PLASMA PROF 163 ACC Art. 957 (3.9 MB) >. General warning manual. Download the manual (ref. Cebora software applications. Cebora car 30 manual. The software and the synergic programs can be. Duty cycle and the cutting speed make the PLASMA PROF 163 ACC ideal for.

• CEBORA S.p.A. TRI STAR MIG 1635/M POWER SOURCE art. 283 SERVICE MANUAL 3.302.233.

• CEBORA S.p.A. CONTENTS - GENERAL INFORMATIONS...3 - Introduction....3 - General service policy....3 - Safety informations....3 - Electromagnetic compatibility...3 - SYSTEM DESCRIPTION...4 - Introduction....4 - Technical specifications....4 - Description of power source art. 283...4 - MAINTENANCE....

• It is forbidden to attempt to repair damaged electronic boards or modules; replace them with original Cebora spare parts. 1.3 - Safety informations.

The safety notes provided in this manual are an integral part of those given in the Instruction Manual. • 2 - SYSTEM DESCRIPTION 2.1 - Introduction. The TRI STAR MIG 1635/M is a multiprocess system for MIG/MAG, TIG-DC and MMA welding. Satcodx World Satellites.

It is made up of an electronic power source (art. 283) and a set of accessories to adapt to various types of applications (see list in the Sales Catalogue). • CEBORA S.p.A. − two 3-digit displays to show output voltage, welding current, wire speed, values assignable to the selected parameters, material type, services functions and error codes. The welding current regulation is performed by the microprocessor on the control board (29), based on signals received from the power board (32), and parameters set via control panel. • CEBORA S.p.A.

3 - MAINTENANCE WARNINGS ANY INTERNAL INSPECTIONS OR REPAIRS MUST BE CARRIED OUT BY QUALIFIED PERSONNEL. BEFORE BEGINNING MAINTENANCE OPERATIONS, UNPLUG THE MACHINE FROM THE MAINS AND WAIT FOR THE INTERNAL CAPACITORS TO DISCHARGE (2 MINUTES). 3.1 - Periodic inspection, cleaning. • ♦ After three seconds, leds and displays lit (lamp test). Fans (27) working. ♦ After one second, display (M) indicates the Cebora article number (i.e.: “283”).

♦ After one second, display (M) indicates the version of the programs related to the synergic curves (i.e.: “H01”, H = synergic programs table, 01 = programs. • CEBORA S.p.A. NO (see 3.3.3).

3.2.3 - MIG operation. NOTE On continuation it is illustrated the sequence of MIG process only, which involves all the circuits of the power source, and therefore is considerate sufficient for the purpose of this manual. • CEBORA S.p.A. 3.3 - Troubleshooting.